Includes

1 x MAKITA 40V MAX XGT Brushless 3/4″ Impact Wrench Skin TW001GZ
1 x MAKITA 40V Max XGT Brushless 125mm Paddle Switch Angle Grinder Skin GA013GZ
2 x MAKITA 40V Max XGT 4.0Ah Battery 191B26-6
1 x MAKITA 40V Max XGT Single Port Rapid Charger DC40RA 191E09-4
1 x MAKITA Tote Bag

MAKITA 40V MAX XGT Brushless 3/4″ Impact Wrench Skin TW001GZ
The 40V Max. Brushless Impact Wrench delivers 1,800Nm of fastening torque and 2,050Nm nut busting torque for unmatched fastening performance. Featuring high durability construction the battery housing is protected by a battery vibration suppression system. This system protects the battery from damage due to excess vibration caused during heavy duty fastening applications. In addition to the power of the TW001G it is also highly intelligent with 6 optimised fastening controls each mode tailors the driver speed and impact rate to the task at hand, ensuring you dont damage the fastener or material.

Heavy duty power with 2,050Nm nut busting torque
High durability construction with battery vibration suppression protecting the battery
Optimised application selector with 6 modes adapting speed and impacts for each task
Full speed mode shortens the distance of trigger travel required to hit full speed
4 Stage power selection for optimum rpm and fastening torque

Specifications

Max. capacities standard bolt: M12 – M36
Max. capacities high tensile bolt: M10 – M27
No load speed:

Max: 0-1,800rpm
Hard: 0 – 1,400rpm
Med: 0 – 1,150rpm
Soft: 0 – 950rpm

Impact rate:

Max: 0-2,500ipm
Hard: 0 – 2,400ipm
Med: 0 – 2,200ipm
Soft: 0 – 1,900ipm

Max. fastening torque:

Max: 1,800Nm
Hard: 1,500Nm
Medium: 840Nm
Soft: 450Nm

Nut busting torque: 2,050Nm
Drive shank: 3/4″ Square C-Ring

MAKITA 40V Max XGT Brushless 125mm Paddle Switch Angle Grinder Skin GA013GZ
The 40V Max. Brushless 125mm (5) Paddle Switch Angle Grinder delivers cutting speeds up to 40% faster then the 18V equivalent. Re-designed to withstand harsh conditions the GA013G is highly durable with advanced protection against heat and dust. The improved heat dissipation capacity allows for continuous heavy duty operation. In addition there are a number of enhanced safety features including Active Feedback Sensors that will shut down the tool in the event of kickback. As well as soft start, anti-restart and an electric brake that will rapidly stop the wheel rotation for safe user operation.

Heavy duty power, cutting 40% faster then the 18V equivalent model
High durability with advanced protection against heat and dust
Active feedback sensors shut down the tool in the event of a kickback
Enhanced safety features including an electric brake, soft start and anti-restart
Improved heat dissipation capacity allows for continuous heavy duty use

Specifications

Wheel diameter: 125mm (5″)
Switch Type: Paddle Switch
Electric Brake: Yes

MAKITA 40V Max XGT 4.0Ah Battery 191B26-6
The 40V Max 4.0Ah battery has been designed to be both tough and also highly intelligent. Digital communication not only between the battery and the charger, but also the tool and battery. This communication with the tool, relays tool specifications to optimise tool performance. The higher battery output is a genuine solution for heavy industrial users allowing for continuous high demand activity over extended periods of time.
Build to be highly durable the XGT batteries feature a heavy duty cell casing significantly improving the batteries impact resistance. Along with this casing the water resistance has been significantly increased with intricate 3 layer moisture protection shield protecting the cells from water ingress. Reliable tools are a must for all professional applications, and XGT is durable and built to perform.

Digital communication between the tool & battery for optimised performance
Heavy duty cell casing significantly improves the batteries impact resistance
Battery ventilation system maximises battery life
Short circuit prevention structure protects terminals from dust and moisture
3-layer moisture protection shields cells from water ingress

Specifications

Energy Capacity: 144Wh
Charge time: 45mins
Voltage: 40V Max

MAKITA 40V Max XGT Single Port Rapid Charger DC40RA 191E09-4
The 40V Max Single Port Rapid Charger provides fast charging for Makita high output 40V Max XGT batteries. The newly designed optimum charging system is able to achieve optimised fast charging by feeding real time battery data, such as battery condition and temperature with the charger. Dual cooling fans significantly reduce charging time as both the battery and charging circuit are cooled, allowing the charger to perform consecutive fast charges.
Ensuring users have are able to stay connected with the 18V LXT platform the DC40RA is compatible with the charging adaptor ADP10 (optional accessory). With this adaptor the DC40RA is able to rapid charge 18V LXT batteries up to 27% faster than 18V rapid charging models. Ensuring the battery spends more time working and less time sitting on the charger.

Rapid charging system communicates data between battery and charger for optimum charging
Equipped with dual cooling fans, cooling the battery & charging circuit for rapid charging
Compatible with ADP10 adaptor (optional accessory) for charging 18V LXT batteries
Large charging status indicator light & selectable full charge melody

Specifications

Charge time:

45mins (BL4040)
28mins (BL4025)
40mins (BL1860B using APD10)

Voltage: 40V Max